Kodak IMAGELINK 500 User Reference page 23

Error Code Number and Message
E107_Doc_Skew
Monitor_Warning
E112_Invalid
Patch_Level
E113_Incorrect
Image_Address
A-61409 April 1994
Required Action(s)
Operator Action
If necessary, note the document that was skewed
greater than the defined maximum angle and press the
C (clear/cancel) key to clear the error message
(optional). This error message is just a warning to the
operator; if the displayed error message is ignored the
present scanning can be continued and the error
message will be cleared at the completion of scanning
when the Stop or End key is pressed. If the error
message persists, contact the system administrator.
System Administrator Action
Verify correct operation. If the error message persists,
call service.
Operator Action
Press the C (clear/cancel) key to clear the error
message, then verify the current Image Level and
Image Address. This error message is just a warning to
the operator; if the C (clear/cancel) key is pressed the
error message will be cleared and the present scanning
can be continued. If the error message persists, contact
the system administrator.
System Administrator Action
Verify correct operation. If the error message persists,
call service.
Operator Action
Press the C (clear/cancel) key to clear the error
message (optional), then press the Next key to input a
correct Image Address. This error message is just a
warning to the operator. If the error message is
displayed when the transport system is not running and
if the error message is cleared by pressing the C (clear/
cancel) key, normal scanning can be performed. If the
error message is displayed while scanning, the
displayed error message can be ignored and the
present scanning can be continued and the error
message will be cleared at the completion of scanning
when the Stop or End key is pressed. If the error
message persists, contact the system administrator.
System Administrator Action
Verify correct operation. If the error message persists,
call service.
OM-7