Selecting A Headset; Setting Headset Mic Level - Avaya J189 Using Manual

Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Audio settings and press Select.
4. Scroll to Headset signaling.
5. Press Toggle to select one of the following options:
• Disabled: Disables signaling from the phone to the headset.
• Switch hook and alert: Activates the link to the headset if you press Headset. When
the phone receives an incoming call, you hear the alert tone in the headset.
• Switch hook only: Activates the link to the headset if you press Headset. When the
phone receives an incoming call, you do not hear the alert tone in the headset.
6. Press Save.

Selecting a headset

About this task
Use this procedure to select a headset option for working with the phone. You can select the
following headsets: Wired, USB or Bluetooth.
Before you begin
Make sure there is a headset connected to your phone.
Procedure
1. Navigate to Settings > Audio > Headset selection.
2. Toggle to the headset you want to select.
3. Press Save.

Setting headset mic level

About this task
Use this procedure to adjust the best headset performance.
Before you begin
• Ensure that you are on a call and the caller's audio level is at 50%.
• Adjust the microphone position as recommended by your headset vendor.
Procedure
1. Press the Main menu.
April 2021 Using Avaya J189 SIP IP Phone in Avaya Aura
Comments on this document? infodev@avaya.com
Audio
®
121