Husqvarna AUTOMOWER 305 Operator's Manual page 26

A
To set the Lawn Coverage function
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Coverage > Area 1-3 .
3. Use the arrow button to select the area.
4. Push the OK button.
5. Measure the distance from the charging station to
the start of the area. Measure along the guide wire.
To measure the distance from the
Refer to
charging station on page 26 .
6. Push the arrow buttons to select the distance,
measured in m.
7. Push the OK button.
8. Use the arrow buttons to select the percentage of
the cutting time the product must cut the area. The
percentage is equal to the percentage of the area
in relation to the complete work area.
a) Measure the area.
b) Divide the measured area with the total work
area.
c) Convert the result to percentage.
Note:
The sum of Area 1-3 must be 100% or
less. If the sum is less than 100%, the product
sometimes straddles the guide wire and starts to
mow at the charging station.
9. Push the BACK button.
To set the System Passage Mowing function
Note:
To prevent that the grass in the narrow passage
is worn, Husqvarna recommends to set a low
Systematic Passage Mowing .
percentage for the
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 23 .
26 - Installation
2.
C
3.
4.
5.
B
6.
7.
8.
9.
Settings > Lawn
10. Push the OK button to enable
11. Push the BACK button.
To do a test of the Lawn Coverage function
1.
2.
3.
4.
5.
6.
7.
To measure the distance from the charging station
1.
2.
3.
4.
5.
6.
7.
8.
Use the arrow buttons and the OK button to move
through the menu structure Settings > Lawn
Coverage > Area 1-3 .
Use the arrow buttons to select the area.
Push the OK button.
Measure the distance from the charging station to
the beginning of the narrow passage. Measure
along the guide wire. Refer to
distance from the charging station on page 26 .
Note:
Make sure that the distance to the
Systematic Passage Mowing is set inside the
narrow passage.
Push the arrow buttons to select the distance.
Push the OK button.
Use the arrow buttons to select the % of the cutting
time that the product must start the narrow
passage cutting.
Use the arrow buttons and the OK button to select
More > Systematic Passage Mowing .
Mowing .
Put the product in the charging station.
Do step 1-3 in To get access to the menu in the
display of the product on page 23 .
Use the arrow buttons and the OK button to move
Settings > Lawn
through the menu structure
Coverage > Area > More > Test .
Push the OK button.
Push the START button.
Close the hatch.
Make sure the product can find the area.
Put the product in the charging station.
To get access to the menu in the
Do steps 1–3 in
display of the product on page 23 .
Use the arrow buttons and the OK button to move
Settings > Lawn
through the menu structure
Coverage > Area > How far?
Use the arrow buttons to set 500 m / 500 yd as a
distance.
Push the OK button.
Use the arrow buttons and the OK button to move
Settings > Lawn
through the menu structure
Coverage > Area > More > Test .
Push the OK button.
Push the STOP button when the product is at the
distance you select to measure. The distance
shows in the display.
1462 - 005 - 24.03.2021
To measure the
Systematic Passage