Husqvarna AUTOMOWER 305 Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Lawn Mower
  5. Automower 305
  6. Operator's manual

Husqvarna AUTOMOWER 305 Operator's Manual

Hide thumbs Also See for AUTOMOWER 305:
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's manual
®
HUSQVARNA AUTOMOWER
305
EN, English
Read the operator's manual carefully and make sure that you
understand the instructions before you use the product.

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna AUTOMOWER 305

Summary of Contents for Husqvarna AUTOMOWER 305

  • Page 1 Operator's manual ® HUSQVARNA AUTOMOWER EN, English Read the operator's manual carefully and make sure that you understand the instructions before you use the product.

  • Page 2: Table Of Contents

    Contents 6.1 Introduction - troubleshooting......38 1 Introduction 6.2 Fault messages...........38 1.1 Introduction............3 6.3 Information messages.........42 1.2 Product overview ..........4 6.4 Indicator lamp in the charging station....43 1.3 Symbols on the product........5 6.5 Symptoms............44 1.4 Symbols on the display......... 5 6.6 Find breaks in the loop wire........

  • Page 3: Introduction

    PIN code: The serial number is on the product rating plate and on the product carton. • Use the serial number to register your product on www.husqvarna.com. 1.1.1 Support The operator selects the operation settings with the keys For support about the product, speak to your Husqvarna on the keypad.

  • Page 4: Product Overview

    1.2 Product overview The numbers in the figure represent: 17. Maintenance tool 18. Cutting system Body 19. Chassis box with electronics, battery and motors Top cover 20. Handle Hatch to keypad, display and cutting height 21. Loop wire for boundary loop and guide wire adjustment 22.

  • Page 5: Symbols On The Product

    1.3 Symbols on the product These symbols can be found on the product. Study them The low-voltage cable must not be carefully. shortened, extended or spliced. WARNING: Read the user in- Do not use a trimmer nearby the low- structions before operating voltage cable.

  • Page 6: Symbols On The Battery

    The product is in the charging station but do not charge the battery. Do not discard the battery into fire and do not expose the battery to a heat source. The product is set in ECO-mode. Do not immerse the battery into water. ®...

  • Page 7: Menu Structure Overview - 1

    1.7 Menu structure overview - 1 Schedule Overview/Monday Period 1 Period 2 Copy Reset Current All week days Security Advanced Security level New loop Change Duration Medium High signal PIN code Duration Duration of alarm of time lock Messages Fault Info messages messages...

  • Page 8: Menu Structure Overview - 2

    1.8 Menu structure overview - 2 Installation Lawn Find charging station Advanced coverage Guide Boundary Charger Area 1-3 Charging station range Disable More Delay Disable More Delay time time Test Reset Test Test Reset guide right left How? Disable More Corridor Exit Reversing...

  • Page 9: Display

    1.9 Display The display on the product shows information and settings of the product. To access the display, push the STOP button. 1.10 Keypad Use the keypad on the product to navigate in the menu. To access the keypad, push the STOP button. •...

  • Page 10: Safety

    2 Safety 2.1 Safety information 2.1.1 IMPORTANT. READ CAREFULLY BEFORE USE. KEEP FOR FUTURE REFERENCE The operator is responsible for accidents or hazards occurring to other people or property. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities (that could affect a safe handling of the product), or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person...

  • Page 11: Safety Definitions

    The appliance must be disconnected from the supply mains when removing the battery. WARNING: The product CAUTION: Used if there is a risk of damage to the product, other materials or can be dangerous if used the adjacent area if the instructions in the manual are not obeyed.
  • Page 12 It is not permitted to modify the original design of code has been entered. the product. All modifications are made at your • Husqvarna does not guarantee full compatibility own risk. between the product and other types of wireless •...
  • Page 13 Push the ON/OFF button for 3 seconds and make sure the product is switched off. Check that the indicator lamp on the keypad is not lit. This means To use the that the product is disabled. Refer to WARNING: Use the plug to disconnect ON/OFF button on page 32 .

  • Page 14: Installation

    When the product has cut the grass for some time, the perceived sound level is much lower. Note: Refer to www.husqvarna.com for more information about installation. 3.4 Before the installation of the wires You can select to attach the wires with stakes or bury 3.2 Main components for installation...
  • Page 15 3.4.3 To examine where to put the • Put the charging station in an area with protection from the sun. boundary wire • If the charging station is installed on an island, make sure to connect the guide wire to the island. CAUTION: There must be a barrier of To make an island on page 17 .
  • Page 16 " 10 cm / 4 " max 1 cm / 0.4 • If you have a paving stone path that is in level with the lawn, put the boundary wire below the paving stone. Note: If the paving stone is minimum 30 cm / 12 Drive Past in.
  • Page 17 3.4.3.3 To make an island CAUTION: Do not put a section of boundary wire across the other. The >10% 0-25% sections of boundary wire must be parallel. CAUTION: Do not put the guide wire across the boundary wire. CAUTION: Isolate or remove obstacles •...
  • Page 18 3.4.4 To examine where to put the guide wire • Put the guide wire in a line at a minimum of 2 m / 6.5 ft. in front of the charging station. • Make as much free area as possible to the left of the guide wire when facing the charging station.

  • Page 19: Installation Of The Product

    20 . The product is only to be used with the power supply unit supplied by Connect the low-voltage cable to the charging Husqvarna. station. Put the power supply at a minimum height of 30 cm / 12 in. 1462 - 005 - 24.03.2021...
  • Page 20 min 30 cm / 12” Cut the boundary wire 1-2 cm / 0.4-0.8 in. above each connector. Connect the power supply cable to a 100-240V Push the right connector onto the metal pin on the power outlet. charging station with the mark "AR". Note: When the charging station is connected, it Push the left connector onto the metal pin on the...

  • Page 21: To Put The Wire Into Position With Stakes

    3.7 To bury the boundary wire or the Put the 2 ends of the boundary wire and the end of the guide wire into the coupler. guide wire Note: Make sure that you can see the ends • Cut a groove in the ground with an edge cutter or a of the wires through the transparent area of straight shovel.

  • Page 22: Product Settings

    Download the Automower ® Connect app on your 3.9.3 Calibration mobile device. Sign up for a Husqvarna account in the The calibration process is automatic. After the basic ® Automower Connect app. settings are done, the product moves away from the charging station and stops, while it calibrates some of An e-mail is sent to the registered e-mail address.

  • Page 23: Product Settings With Keypad And Display

    Use the arrow buttons and the OK button to move Enter the time with the number buttons. The through the menu structure Accessories > product can cut the grass 1 or 2 periods each day. Connect@Home > Pairing > New pairing . ®...
  • Page 24 To get access to the menu in the Use the arrow buttons and the OK button to move Do steps 1–3 in through the menu structure Schedule > Overview > display of the product on page 23 . Reset . Use the arrow buttons and the OK button to move Current day Security >...
  • Page 25 necessary. Also, check that the blade disc is clean and 3.12.5.1 To read the messages that the blades are in good condition. Do steps 1–3 in To get access to the menu in the display of the product on page 23 . To get access to the menu in the Use the arrow buttons and the OK button to move Do steps 1–3 in...
  • Page 26 To prevent that the grass in the narrow passage Coverage > Area > More > Test . is worn, Husqvarna recommends to set a low Systematic Passage Mowing . percentage for the Push the OK button.
  • Page 27 To disable or enable the Lawn Coverage function Push the number buttons to set the time. Disable or enable the Lawn Coverage function for each Push the OK button. area. Push the BACK button. Do steps 1–3 in To get access to the menu in the Use the arrow buttons and the OK button to move display of the product on page 23 .
  • Page 28 charging station > Overview of search methods > To set the exit angle Charging station range . Do steps 1–3 in To get access to the menu in the MAX, MID, MIN . display of the product on page 23 . Use the left arrow button to select Push the BACK button.
  • Page 29 3.12.8.1 Profiles Note: ECO mode to save energy and avoid With the function Profiles, different sets of product interference with other equipment, for example hearing settings can be saved. This can be used when one loops or garage doors. product is used for more than one work areas and charging stations.
  • Page 30 To get access to the menu in the This menu handles accessories mounted on the display of the product on page 23 . product. Contact your local Husqvarna representative for Use the arrow buttons and the OK button to move more information on available accessories.
  • Page 31 Note: ® All countries do not support Automower Connect because of regional specified cellular systems. ® The included Automower Connect life-time service only applies if there is a third part sub-supplier of 2G/3G/4G available in the operational area. In some countries ®...

  • Page 32: Operation

    4 Operation 4.1 To use the ON/OFF button Note: If the product is parked in the charging station, the product will start to operate when the battery is fully WARNING: Read the safety Schedule settings is set for operation charged and if the instructions carefully before you start the product.

  • Page 33: To Park The Product

    4.6 To charge the battery Note: After the product has operated in the operating Spot cutting , it will automatically start to cut in the mode WARNING: Only charge the product Main area or Secondary area . operating mode using a charging station which is intended for it.
  • Page 34 • Turn clockwise to increase the cutting height. • Turn counter-clockwise to decrease the cutting height. Close the hatch on the product. 34 - Operation 1462 - 005 - 24.03.2021...

  • Page 35: Maintenance

    Push the maintenance tool down in 1 of the 4 running water from a water hose. positions, and pull the body up. Husqvarna recommends to use a special cleaning and Continue with the remaining positions while you maintenance kit, available as accessory. Speak to your hold the body up.

  • Page 36: Replace The Blades

    All 3 blades and screws must be replaced at the same time to obtain a balanced cutting system. Use Husqvarna original blades embossed with the Technical data on crowned H-mark logotype, refer to page 49 .

  • Page 37: Battery

    The battery is fine as long as the product maintains a well-cut lawn. 5.5 Winter service Take your product to your Husqvarna central service for service prior to winter storage. Regular winter service will maintain the product in good condition and create the best conditions for a new season without any disruptions.

  • Page 38: Introduction - Troubleshooting

    In this chapter you can find information and help about faults and symptoms of the product. You can find more information and FAQ (Frequently Asked Questions) on www.husqvarna.com. 6.2 Fault messages The fault messages in the table below are shown in the display of the product. Speak to your Husqvarna representative if the same message shows frequently. Message...
  • Page 39 Message Cause Action Wheel motor Grass or other object is wrapped around the Clean the wheels and around the wheels. blocked, left/right drive wheel. Wheel motor overloa- ded, left/right Wheel drive problem, right/left Cutting system Grass or other object is wrapped around the Clean the wheels and around the wheels.
  • Page 40 Message Cause Action Wrong PIN code Wrong PIN code has been entered. Five at- Enter the correct PIN code. Contact Husq- tempts are permitted, and the keypad is then varna customer service if you forget the PIN blocked for a period of time. code.
  • Page 41 Message Cause Action Trapped The product is stuck in a small area behind a Check if there are any obstacles which make number of obstacles. it hard for the product to move on from this location. Remove the obstacles or create an island around the obstacles.

  • Page 42: Information Messages

    6.3 Information messages The information messages in the table below are shown in the display of the product. Speak to your Husqvarna representative if the same message shows frequently. Message Cause Action Low battery The product cannot find the charging station.

  • Page 43: Indicator Lamp In The Charging Station

    The indicator lamp in the charging station must show a solid or flashing green light for a correct installation. If not, follow the instructions in the troubleshooting guide below. Speak to your Husqvarna customer service for more information. Light Cause...

  • Page 44: Symptoms

    If your product does not work as expected, follow the symptoms guide below. There is a FAQ (Frequently Asked Questions) on www.husqvarna.com which provides more detailed answers to a number of standard questions. Contact Husqvarna customer service if you still cannot find the reason for the fault. Symptoms...

  • Page 45: Find Breaks In The Loop Wire

    Symptoms Cause Action The product is The product has reached its maximum cut- No action. Make an esti- parked for hours in ting time for the day. Refer to the charging station. mate of the necessary operating time on page 23 . The hatch is closed but the START button is Push the STOP button to open the hatch.
  • Page 46 Check that the indicator lamp in the charging b) If the suspected boundary wire is long (thick station flashes blue, which indicates a break in the black line) then do as follows: Put AL and GUIDE Indicator lamp in the boundary loop.
  • Page 47 Continue until only a very short section of the wire remains which is the difference between a solid green light and a flashing blue light. Then follow instruction in step 5 below. If indicator lamp still flashes blue in step 3 above: Put AL and GUIDE back in their original positions.

  • Page 48: Transportation, Storage And Disposal

    7.3.1 To remove the battery CAUTION: Only remove the battery when you dispose the product. When you remove the warranty seal, the Husqvarna warranty is no longer applicable. Remove the top cover and the body of the product. To clean the chassis and blade Follow steps 1-7 in disc on page 35 .

  • Page 49: Technical Data

    8 Technical data 8.1 Technical data ® Dimensions Automower Length, cm / in. 57 / 22.4 Width, cm / in. 43 / 16.9 Height, cm / in. 25 / 9.8 Weight, kg / lbs 9.4 / 21 ® Electrical system Automower Battery, Lithium-Ion 18 V/2.0 Ah Art.

  • Page 50: Registered Trademarks

    ® Bluetooth Output power 8 dBM Husqvarna AB does not guarantee full compatibility between the product and other types of wireless systems such as remote controls, radio transmitters, hearing loops, underground electric animal fencing or similar. 8.2 Registered trademarks Bluetooth ®...

  • Page 51: Warranty

    The blades and wheels are seen as disposable and are not covered by the warranty. If an error occurs with your Husqvarna product, please contact Husqvarna customer service for further instructions. Please have the receipt and the product’s serial number at hand when contacting Husqvarna customer service.
  • Page 52 AUTOMOWER ® is a trademark owned by Husqvarna AB. © Copyright 2021 HUSQVARNA. All rights reserved. www.husqvarna.com Original instructions 1142327-26 2021-04-01...

Table of Contents