Terminator Card; Figure 4-22. Terminator Card Removal - Dell 2200 Service Manual

Terminator Card

terminator
card
microprocessor
retention bracket

Figure 4-22. Terminator Card Removal

1. Remove the system board assembly.
2. Remove the terminator-card retention bracket cover.
Using the thumb and forefinger of each hand, pinch the vertical tabs at each
end of the cover, and then lift the cover straight up.
3. Remove the terminator card.
Hold the card by its edges, and lift the card straight up from the micro-
processor retention bracket.
terminator-card
retention bracket cover
tabs (2)
Removing and Replacing Parts 4-21