F
ront-Bezel Inserts
Figure 4-4. Plastic Insert Removal
To remove a plastic insert, follow these steps:
1. Remove the front bezel.
2. With the inside of the front bezel facing you, grasp the front bezel with
both hands and place your fingers on the outside of the plastic insert.
3. Push on the outside of the plastic insert (indicated by the two arrows in
Figure 4-4); then twist the sides of the front bezel outward until the
plastic insert is released from the latches inside the bezel.
To replace a plastic insert, position one end of the insert in place under its latch;
then press the other end into place until the tab snaps under the latch.
latch
tab
plastic insert
Removing and Replacing Parts
4-5