70° And Pw93; 70° Taper - Invacare Formula CG Tilt User Manual

7.17.2 70° and PW93
1. Remove any accessory from the footrest(s).
Lay the footrest on a flat surface to simplify this
procedure.
2. Remove the footrest from the wheelchair. Refer to Footrest
Height Adjustment.
Remove the mounting screw A, washers B and locknut C that
3.
secure the lower footrest assembly D to the upper footrest
support E.
4. Reposition the lower footrest to the desired height.
5. Reinstall the mounting screw, washers and locknut that secure
the lower footrest to the footrest support and tighten securely.
6. Repeat STEPS 1-5 for the opposite wheelchair footrest, if
necessary.
1143155-R-01
7. Reinstall the footrest(s) onto the wheelchair. Refer to Footrest
Height Adjustment.
8. Reinstall any accessory onto the footrest(s).
7.17.3 70° Taper
1. Remove any accessory from the footrest(s).
2. Remove the footrest from the wheelchair. Refer to Footrest
Height Adjustment.
Lay the assembly on a flat surface to improve access
to the hardware.
Note the position of the spacers before disassembly
3. Remove the mounting screw and coved spacer that secures the
lower footrest assembly.
4. Position the footrest assembly to the desired height.
Setup/Maintenance
61