Loading Special Materials - Dell 1100 Owner's Manual

Dell 1100: owners manual

Hide thumbs Also See for 1100:

Table of Contents

Loading Special Materials

1 Open the paper input tray.

2 Load the print material in the paper input tray. Do not mix types.

3 Adjust the length and width guides against the print material without bending it.

4 To print on special material, you must select Manual Feed for Source from the software

application, and then select the appropriate paper size and type. For details, see the

HTML User's Guide

5 Press

See the following directions to load each type of print material.

•

Load an envelope in the tray with the flap side down and the stamp area on the top left

side. The end of the envelope with the stamp area enters the printer first, from the

center of the tray.

Loading Print Media

to start.

NOTICE:

Never load envelopes with stamps, clasps, snaps, windows, coated linings, or self-

stick adhesives. These envelopes may severely damage the printer. The stamp is shown in the

illustration only for placement.

CAUTION:

If you print 20 envelopes in succession, the surface of the top cover may

become hot. Please exercise caution.

Table of Contents