Load a sheet of labels in the tray with the side to be printed on facing up.
•
NOTE:
To prevent labels from sticking to each other, do not let the printed label sheets stack
up as they are printed out.
Load a transparency in the tray with the side to be printed on facing up, and the top
•
with the adhesive strip inserted first.
NOTE:
To prevent transparencies from sticking to each other, do not let the printed sheets
stack up as they are printed out.
NOTE:
Place transparencies on a flat surface after removing them from the printer.
NOTE:
Do not use transparencies that are separating from the backing sheet.
Loading Print Media
23