Printing; Basic Printing; Accessing Printer Properties; Setting High Altitude Correction - Dell 1100 Owner's Manual

Printing

Basic Printing

1 Load paper. See page 19.
2 With your document open, click File
3 To change the printer settings, click Properties, Preferences, Options, or Setup, depending on
the program or operating system.
The printer properties window displays.
4 From the five tabs on the top of the printer properties window, confirm the selections.
5 Click OK until the Print window appears.
6 Click OK or Print, depending on the program or operating system, to start printing.
NOTE:
Press on the operator panel to cancel a print job. In Manual Feed mode, you can't cancel a
print job by pressing

Accessing Printer Properties

Change printer settings in the printer properties tabs. The printer properties window differs,
depending on your operating system.
1 With your document open, click File
The Print window appears.
2 In the Print window, click Properties, Preferences, Options, or Setup, depending on your
program or operating system.
3 For details about the printer properties tabs, please refer to the

Setting High Altitude Correction

If your printer is going to be used at an altitude above 2,500 m (8,200 ft), you can optimize the
print quality for those circumstances using the High Altitude Correction option.
1 Click the Windows Start menu.
2 Click Settings and then Printer, or Printers and Faxes.
3 Select the Dell Laser Printer 1100 icon.
4 Right-click on the printer icon and select Properties.
5 Click the Printer tab and select the High Altitude Correction checkbox.
→
Print. Make sure that your printer is selected.
.
→
Print.
HTML User's Guide
.
Printing
25