Sound And Speaker Problems; No Sound From Speakers - Dell XPS Gen 3 Owner's Manual

NLOCK THE SCANNER
U
R ESTART THE COMPUTER AND TRY THE SCANNER AGAIN
C HECK THE CABLE CONNECTIONS
• See the scanner documentation for cable connection information.
• Ensure that the scanner cables are securely connected to the scanner and the computer.
V ERIFY THAT THE SCANNER IS RECOGNIZED BY
1
Click the Start button, click Control Panel, and then click Printers and Other Hardware.
2
Click Scanners and Cameras.
If your scanner is listed, Windows recognizes the scanner.
EINSTALL THE SCANNER DRIVER
R

Sound and Speaker Problems

CAUTION:
located in the Product Information Guide.

No sound from speakers

NOTE:
The volume control in some MP3 players overrides the Windows volume setting. If you have been
listening to MP3 songs, ensure that you did not turn the player volume down or off.
HECK THE SPEAKER CABLE CONNECTIONS
C
diagram supplied with the speakers. If you purchased a sound card, ensure that the speakers are
connected to the card.
NSURE THAT THE SUBWOOFER AND THE SPEAKERS ARE TURNED ON
E
speakers. If your speakers have volume controls, adjust the volume, bass, or treble to eliminate
distortion.
DJUST THE
A W
of your screen. Ensure that the volume is turned up and that the sound is not muted.
ISCONNECT HEADPHONES FROM THE HEADPHONE CONNECTOR
D
disabled when headphones are connected to the computer's front-panel headphone connector.
42
Solving Problems
— Ensure that your scanner is unlocked if it has a locking tab or button.
—
— See the scanner documentation for instructions.
Before you begin any of the procedures in this section, follow the safety instructions
— Ensure that the speakers are connected as shown on the setup
INDOWS VOLUME CONTROL
— Click or double-click the speaker icon in the lower-right corner
M ICROSOFT W INDOWS —
— See the setup diagram supplied with the
— Sound from the speakers is automatically