System Board Components
main power
connector (J21)
power indicator
(LED1)
memory module
connectors
(DDR1, DDR2)
fan connector (J30)
microprocessor
connector (U16)
12-V power
connector (J10)
modem telephony
connector (J25)
CD audio
connector (J8)
Adding Cards
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
1
Shut down the computer through the Start menu (see page 18).
2
Ensure that your computer and attached devices are turned off. If your computer and
attached devices did not automatically turn off when you shut down your computer, turn
them off now.
hard drive
CD drive
connector (J20)
connector (J23)
back of computer
floppy drive
control panel
connector
connector (J28)
(J18)
battery socket (BT1)
CMOS jumper (JP2)
front-panel I/O
connector (J27)
password
jumper (JP1)
front-panel audio
connector (J29)
PCI card slots (3)
(PCI1, PCI2, PCI3)
Removing and Installing Parts
51