Setting Procedure Of Initialize Mode - SMC Networks PF2A7 Series Operation Manual

■Setting procedure of initialize mode

<Operation>
Press the button for 2 seconds or longer in measurement mode.
Selection of display mode
Select the display of instantaneous flow or accumulated flow.
Press the button to select.
[d_1]: display instantaneous flow
[d_2]: display accumulated flow
The product with unit selection function
Selection of unit selection function
Display unit can only be selected for products with unit selection function.
Press the or
Display Instantaneous flow
[U_1] L/min

[U_2] CFM x 10
: Refer to page
24 for the flow rate when [U_2] is selected.
Selection of output mode (OUT1)
Select the switch output mode required referring to the list of outputs (page 20).
Press the button to select.
[o10]: Instantaneous output mode
[o11]: Accumulated output mode
[o12]: Accumulated pulse output
mode
Selection of output mode (OUT2)
Select the switch output mode required referring to the list of outputs (page 20).
Press the button to select.
[o20]: Instantaneous output mode
[o21]: Accumulated output mode
[o22]: Accumulated pulse output
mode
button for selection.
Accumulated flow
L
-2, -1 3
CFM x 10 ft x 10
Press the
-1
Press the
Press the
Press the
-22-
button. SI unit only
button.
button.
button. (continued)
No.PF※※-OMO0008-C