SMC Networks PF2A7 Series Operation Manual page 15

Terms
R Rated flow range
Rated pressure range
Repeatability
Response time
S
Setting flow range
Switch output
T
Temperature
characteristics
U
Unit selection function
W
Window comparator
mode
The flow range within which the product will meet all published specifications.
The pressure range within which the product will meet all published specifications.
Reproducibility of the display or analogue output value, when the flow is repeatedly
changing.
Time from when the target flow is applied until the flow reaches 90% of the Set value.
The range of ON/OFF threshold values that can be set for flow switches products with a
switch output.
An output type that has only 2 conditions, ON or OFF. In the ON condition an indicator
LED will turn on, and any connected load will be powered. In the OFF condition, there
will be no indicator LED and no power is supplied to the load.
The amount of variation in the analogue output or display value when the ambient
temperature is changed.
Function to change the unit in which the value of flow is displayed. Only a product with
this function can change the unit. A product with unit selection function cannot be
purchased if it is used within Japan. Flow is indicated only by SI units in Japan.
An operating mode in which the switch output is turned on or off depending on whether
the flow is within the range of 2 Set values.
-14-
Meaning
No.PF※※-OMO0008-C