Function Selection Mode - SMC Networks PF2A7 Series Operation Manual

Function selection mode

Function selection mode
In measurement mode, press the
This [F_ ] indicates the mode for changing each functional setting.
: When OUT1 or OUT2 is assigned to be instantaneous output mode during initialize mode, [F_1] and [F_2] are displayed.
When OUT1 or OUT2 is assigned to be accumulated output mode, [F_3] is displayed.
●Default settings
[n_1]
[F_1]
[n_2]
Input the Set value of
[n_3]
instantaneous output
[n_4]
[F_2]
Input the Set value of
-
instantaneous output
(Auto-preset)
[1nL]
[F_3]
[1nH]
Input the Set value of
[2nL]
accumulated output
[2nH]
: When Non-Reverse output is selected as the switching operation, n becomes P.
button, to display [F_ ].
Item

Input of the Set point 1 (OUT1)

Input of the Set point 2 (OUT1)

Input of the Set point 3 (OUT2)

Input of the Set point 4 (OUT2)

Input of the Set value for the lower 3 digits (OUT1)

Input of the Set value for the upper 3 digits (OUT1)

Input of the Set value for the lower 3 digits (OUT2)

Input of the Set value for the upper 3 digits (OUT2)
-25-
Default Setting
50% of max. rated flow
[ 5.0] L/min (PF2A710)
[25.0] L/min (PF2A750)
Page
[ 50] L/min (PF2A711)
[ 100] L/min (PF2A721)
[ 250] L/min (PF2A751)
- Page
[ 0]
[ 0]
Page
[ 0]
[ 0]
No.PF※※-OMO0008-C
Page
26
27
28