Summary Of Product Parts - SMC Networks PF2A7 Series Operation Manual

Summary of Product parts

Body
Item
Monitor part
Piping port
Body
Bracket
Connector
Lead wire and connector
Monitor part
Item
Indicator LED
(reference condition)
LED display
Indicator LED (OUT1)
Indicator LED (OUT2)
button ( UP)
button (SET )
button ( DOWN)
See below.
Connected to the fluid inlet at IN side and to the fluid outlet at OUT side.
The body of the product.
Bracket for mounting the product.
Connector for electrical connections.
Lead wire to supply power and transmit output signals.
Indicates the reference condition selected. LED is ON (Red) when normal condition is
selected.
Displays the flow value, setting mode, and error indication.
Indicates the output status of OUT1. LED is ON (Green) when OUT1 is ON.
The LED flashes when an over current error occurs.
When the accumulated pulse output mode is selected, the indicator LED will turn OFF.
Indicates the output status of OUT2. LED is ON (Red) when OUT2 is ON.
The LED flashes when an over current error occurs.
When the accumulated pulse output mode is selected, the indicator LED will turn OFF.
Selects the mode or increases the ON/OFF Set value.
Press this button to change to another mode and to set a value.
Selects the mode or decreases the ON/OFF Set value.
-12-
Description
Description
Connector pin
numbers
(On the product)
1 DC(+)
2 OUT2
3 DC(-)
4 OUT1
No.PF※※-OMO0008-C