■[F80] Setting of power saving mode
The display can be turned off to reduce power consumption. (About 12%)
This function is to turn to power saving mode when a button operation is not performed for 30 seconds.
While the display is off, the decimal points of the main screen will flash.
In the default setting, power saving mode is OFF (normal mode).
<Operation>
Press the
or
button in function selection mode to display [F80] on the main screen.
The sub screen displays [dSP] and the current set value alternately.
Press the
Sub screen
Press the
In power saving mode, the decimal points on the main screen flash. When any button is operated, the
display will turn on. If no button operation is performed for another 30 seconds the display will turn off again.
button.
Press the
or
button to confirm.
[F80] Setting of power saving mode is completed.
The display can be turned off to save
power.
button to select the power saving mode setting.
Return to the function selection mode.
-54-
No.PF※※-OMM0005-N