Error Indication - SMC Networks PF2A7 Series Operation Manual

■Error indication

Error Name Error Display
Excessive
instantaneous flow
OUT1
over current error
OUT2
over current error
System error
Excessive
Accumulated
accumulated flow
flow displayed
: If the error cannot be reset after the above measures are taken, then please contact SMC.
Flow has exceeded the upper limit of the
display flow range.
The switch output load current is more
than 80 mA (OUT1).
The switch output load current is more
than 80 mA (OUT2).
The set data has been changed
unexpectedly.
The display flow range of accumulated
flow has been exceeded.
(flashing)
Error Type
-34-
Troubleshooting Method
Reduce the flow.
Turn the power off and remove
the cause of the over current.
Then turn the power on again.
To reset, press and
buttons simultaneously for
2 seconds or longer.
Then set all data again.
To reset the accumulated flow
value, press and
buttons simultaneously for
2 seconds or longer.
No.PF※※-OMO0008-C