Table of Contents
Advertisement
1886
Insert grommets found in the
holes in the blades, then secure each blade to a blade arm
with screws found in the
hardware bag.
Repeat x5
7
Ceiling Bracket
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
hardware bag into the
Downrod
Hanging Fan
Insert the two canopy screws
found in the
IMPORTANT
NOTE: Follow the instructions on the blade. Installing
it incorrectly could result in your fan not functioning.
Remove instructional label after installation.
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Note:
Wiring
hardware bag.
Canopy Screw
Canopy Screw
bag
Blade Screw
bag
Grommet
bag
Note:
Fan style may vary.
Remember the screws that
you kept after removing the
shipping blocks? You need
them here.
Blade Arm Screw
Repeat x5
Fan style may vary.
Canopy
Blades
x2
x15
x15
x10
Control
Advertisement
Table of Contents
