Table of Contents
Advertisement
1886
Ceiling fans work in two directions: downdraft (counterclockwise rotation) and updraft (clockwise
rotation). To change the direction of air flow, turn the fan off and let it come to a complete stop.
Slide the reversing switch to the opposite position. Restart the fan.
Note:
Fan style may vary.
9
Reversing the Fan
Reverse
Switch
Fan Doesn't Work
• Make sure power switch is on.
• Pull the pull chain to make sure it is on.
• Push the motor reversing switch firmly left or right to
ensure that it is engaged.
• Check the circuit breaker to ensure the power is
turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit breaker, then loosen
the canopy and check all the connections according
to the wiring diagram.
• Check the plug connection in the switch housing.
Troubleshooting
Excessive Wobbling
• Make sure the blades are properly installed on the
blade iron posts.
• Turn the power off, support the fan carefully, and
check that the hanger ball is properly seated.
• Use the provided balancing kit and instructions to
balance the fan.
Noisy Operation
• Make sure the blades are properly installed.
• Check to see if any of the blades are cracked. If so,
replace all of the blades.
Updraft (clockwise rotation)
creates a more indirect airflow.
Updraft airflow is great for
moving warm air downward.
Downdraft (counterclockwise
rotation) creates a direct
breeze and maximum cooling
effect.
Hunter Pro Tip:
Cleaning the Fan
Use soft brushes or cloths to prevent scratching.
Cleaning products may damage the finishes.
Advertisement
Table of Contents
