Using Optional Scanwizard Cubi Software - Microtek LS-4600 User Manual

Using Optional ScanWizard Cubi Software

Before using the ScanWizard Cubi software, you
have to plug the USB Dongle come with your
ScanWizard Cubi software package into your
computer's USB port; otherwise, the ScanWizard
Cubi cannot be activated.
When done, follow the steps below to scan your
target.
1. Refer to the descriptions in "Positioning the
2. Launch ScanWizard Cubi as a stand-alone by clicking on the program icon on
3. If necessary, click the Lamp Settings button to set the direction of the light
4. If necessary, click the Scan Setting button
5. Click the Scan button to start scanning.
6. If necessary, adjust and optimize image by using the Image Adjustment
20 LS-4600 User's Manual
Materials" to place the material to be scanned
on the scan bed.
the desktop.
If ScanWizard Cubi is launched, you will see the ScanWizard Cubi (AP)
interface on the screen on the screen.
projecting (Left, Right, or All) or select a given distance between your target
and the scan bed (scanner glass surface).
(TWAIN) interface. By there, you can customize your scanning settings.
a) Follow the procedure (steps 4 through 9) for "Using ScanWizard Graph
Software" section to specify your scanning requirements.
b) Click the OK button in the Preview window to close the ScanWizard
Cubi (TWAIN) interface and return to the ScanWizard Cubi (AP)
interface.
The ScanWizard Cubi will perform the final scan of the image with the
default or customized scanning settings you specified in the ScanWizard
Cubi (TWAIN) interface.
When the scan is done, the scanned image will be displayed in the
Thumbnail view window on the left column of the interface.
controls.
a) Select a scanned image to be optimized from the Thumbnail view
window.
When done, the selected image will be displayed in the Navigation
window and Index Preview window.
b) If necessary, click an area of the image in the Navigation window to
display that area in the Index Preview Area .
to bring up the ScanWizard Cubi