Using Optional Scanwizard Dtg Software - Microtek LS-4600 User Manual

Using Optional ScanWizard DTG Software

Before using the ScanWizard DTG software, you
have to plug the USB Dongle come with your
software package into your computer's USB
port; otherwise, the ScanWizard DTG cannot be
activated.
When done, follow the steps below to scan your
target.
1. Refer to the descriptions in "Positioning the
2. Launch ScanWizard DTG as a stand-alone by clicking on the program icon on
3. If necessary, click the Scan Setting button
4. Click the Scan button to start scanning.
5. If necessary, adjust and optimize image by using the Image Adjustment
6. When done, click the Export button to save the scanned or/and optimized
18 LS-4600 User's Manual
Materials" to place the material to be scanned
on the scan bed.
the desktop.
If ScanWizard DTG is launched, you will see the ScanWizard DTG (AP)
interface on the screen.
(TWAIN) interface. By there, you can customize your scanning settings.
a) Follow the procedure (steps 4 through 9) for "Using ScanWizard Graph
Software" section to specify your scanning requirements.
b) Click the OK button in the Preview window to close the ScanWizard
DTG (TWAIN) interface and return to the ScanWizard DTG (AP)
interface.
The ScanWizard DTG will perform the final scan of the image with the
default or customized scanning settings you specified in the ScanWizard
DTG (TWAIN) interface.
When the scan is done, the scanned image will be displayed in the
Thumbnail view window on the left column of the interface.
controls.
a) Select a scanned image to be optimized from the Thumbnail view
window. When done, the selected image will be displayed in the
Navigation window and Index Preview window.
b) If necessary, click an area of the image in the Navigation window to
display that area in the Index Preview Area .
c) Optimize the image by using the provided tools for your needs.
image.
to bring up the ScanWizard DTG