Table of Contents
Advertisement
DAP-600P
Configuring Local Area Network
1. Go to the Connections Setup / LAN page.
2. If needed, change the IPv4 address of the access point's LAN interface
and the mask of the local subnet. To do this, click the IPv4 tab and
specify needed values in the IP address and Mask fields in the Local
IP Address section.
3.
If needed, change the static IPv6 address of the access point's LAN
interface. To do this, click the IPv6 tab. In the Local IPv6 Address
section,
specify needed values in the
the APPLY button.
left-click the line of the IPv6 address. In the opened window,
IPv6 address and Prefix fields and click
Quick Installation Guide
36
Advertisement
Table of Contents
