Table of Contents
Advertisement
DAP-600P
Wireless Module Parameters
Advanced functions
Wireless connection rate
2
Maximum wireless signal rate is derived from IEEE standard 802.11ac and 802.11n specifications. In order
to get the rate of 800Mbps in the 2.4GHz band, a Wi-Fi client should support MIMO 4x4 and QAM256
modulation scheme. Actual data throughput will vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead, lower
actual data throughput rate. Environmental factors will adversely affect wireless signal range.
·
Super Mesh function
·
"Client" function (access point mode)
Wireless network client
Wireless network repeater
·
"Client" function (router mode)
WISP repeater
·
WMM (Wi-Fi QoS)
·
Information on connected Wi-Fi clients
·
Advanced settings
·
Smart adjustment of Wi-Fi clients
·
Guest Wi-Fi / support of MBSSID
·
Limitation of wireless network rate
·
Periodic scan of channels, automatic switch to least
loaded channel
·
Support of 802.11ac (5GHz) and 802.11n (2.4GHz) TX
Beamforming
·
Wider bandwidth (up to 160MHz)
·
Autonegotiation of channel bandwidth in accordance
with environment conditions (20/40 Coexistence)
·
Support of STBC
·
IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
2
·
IEEE 802.11b: 1, 2, 5.5, and 11Mbps
·
IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
·
IEEE 802.11n (2.4GHz): 6.5–600Mbps (MCS0–MCS30)
to 800Mbps (QAM256)
·
IEEE 802.11n (5GHz): from 6.5 to 600Mbps (from MCS0
to MCS30)
·
IEEE 802.11ac (5GHz): from 6.5 to 1732Mbps (from
MCS0 to MSC9)
Quick Installation Guide
41
Advertisement
Table of Contents
