D-Link DAP-600P Quick Installation Manual page 24

Wireless ac2600 wave 2 mu-mimo dual band poe access point / router

Hide thumbs Also See for DAP-600P:

Table of Contents

DAP-600P

Mesh Network Main Device (Master)

In order to configure DAP-600P as a main device of your Mesh network, from

the Connection method list, select the Super Mesh value. Then from the

Device Role list, select the Master value. From the Frequency band list,

select the band where your Mesh network operates.

The Super Mesh function cannot operate in both bands simultaneously.

Select one of the bands ( 2.4GHz or 5GHz ) for all devices of the configured

network.

In order to connect your main device to a wired ISP, from the Work mode

list, select the Router value. In this mode you can configure a WAN

connection, set your own settings for the wireless network in the 2.4GHz and

5GHz bands, and set your own password for access to the web-based interface

of the device.

Quick Installation Guide

Table of Contents