Table of Contents
Advertisement
DAP-600P
4.
IPv4 address assignment. By default, the DHCP server of the device
in the access point mode is disabled (the Disable value is selected from
the Mode of dynamic
IPv4
tab). As a rule, the DHCP server should be disabled when the
device is used in the access point mode. If you need to specify other
settings, change the parameters of the DHCP server.
5. IPv6 address assignment.
device in the access point mode is disabled (the Disable value is selected
from the Mode of dynamic
on the IPv6
list
when the device is used in the access point mode. If you need to specify
other settings, change the parameters of the DHCPv6 server.
6.
After specifying the needed parameters on the Connections Setup /
LAN page, click the APPLY button.
IP
address assignment drop-down list
By default, the DHCPv6 server of the
IPv6
tab). As a rule, the DHCPv6 server should be disabled
Quick Installation Guide
address assignment drop-down
on the
37
Advertisement
Table of Contents
