Changing Lan Ipv4 Address - D-Link DAP-600P Quick Installation Manual

Wireless ac2600 wave 2 mu-mimo dual band poe access point / router

Hide thumbs Also See for DAP-600P:

Table of Contents

DAP-600P

Changing LAN IPv4 Address

This configuration step is available for the Access point and Repeater

modes.

1. Select the Automatic obtainment of IPv4 address to let DAP-600P

automatically obtain the LAN IPv4 address.

If you want to manually assign the LAN IPv4 address for DAP-600P, do not

select the Automatic obtainment of IPv4 address checkbox and fill in

the IP address, Subnet mask, DNS IP address, Hostname fields and,

if needed, the Gateway IP address field. Make sure that the assigned

address does not coincide with the LAN IPv4 address of the router to which

your device connects.

If the LAN IPv4 address of DAP-600P was changed, it may be

necessary to change your PC's NIС settings.

2. Click the NEXT button.

Quick Installation Guide

Table of Contents