— delivering the convenience of an Enterprise-wide management solution, at an SMB price. Nuclias Connect gives you the financial and technical flexibility to expand from a small network to a larger one of up to 1,000 Access Points (APs), while retaining a robust and centralized management system.
Intuitive Interface • Multi-Tenant & Role-Based Administration • Payment Gateway (PayPal) Integration and Front-Desk Ticket Management For more information on how to use Nuclias Connect with the DAP-X2810, please refer to the Nuclias Connect User Guide. D-Link DAP-X2810 User Manual...
• Ceiling Brackets • Quick Install Guide Note: No PSU supplied. To power the units use a D-Link 802.3at PoE switch or the D-Link DPE-301GI PoE injector. System Requirements y Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter...
Connect to a Power over Ethernet (PoE) switch or router via Power/Status Blinking Red This LED will blink during boot-up. LAN (PoE) Port an Ethernet cable. Indicates that the DAP-X2810 is working Solid Green properly. Console Port RJ45 console port for debug D-Link DAP-X2810 User Manual...
2. Connect the access point and your computer via DPE-301GI PoE injector. Manage the access point from the computer. Enter dapx2810.local in the address field of your browser. Log in to the Administration Web pages. The default login information is: Username: admin Password: admin D-Link DAP-X2810 User Manual...
Month, Week, Day, Hour, and Minute of the DST starting days. Once the settings are configured, click Update button to accept the configuration and proceed to the main interface menu page. D-Link DAP-X2810 User Manual...
Enter to login. Most of the configurable settings are located in the left menu of the web GUI which contains sections called Basic Settings, Advanced Settings and Status. D-Link DAP-X2810 User Manual...
The channel selection process only occurs when the AP is booting up. To manually select a channel, set this option to Disable and select a channel from the drop-down menu. D-Link DAP-X2810 User Manual...
Page 12
• Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. • Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server. • Select 802.1X if your network is using port-based Network Access Control. D-Link DAP-X2810 User Manual...
Channel Width: Allows you to select the channel width you would like to operate in 2.4GHz and 5GHz. Use the drop- down menu to choose 20 MHz or Auto 20/40 MHz or Auto 20/40/80 MHz. D-Link DAP-X2810 User Manual...
Page 14
Use the drop-down menu to choose Open System or WPA-Personal. Authentication: • Select Open System to communicate the key across the network. • Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-X2810 User Manual...
20 MHz or Auto 20/40 MHz or Auto 20/40/80 MHz. AP MAC Address: Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks. D-Link DAP-X2810 User Manual...
Page 16
Use the drop-down menu to choose Open System or WPA-Personal. • Select Open System to communicate the key across the network. • Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-X2810 User Manual...
Key Index drop-down menu. **Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F. *ASCII (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging from 0-127. D-Link DAP-X2810 User Manual...
AUTO, AES, or TKIP from the drop-down menu. Group Key Update: Select the interval during which the group key will be valid. The default value of 3600 is recommended. Pass Phrase: When you select WPA-Personal, enter a Pass Phrase in the corresponding field. D-Link DAP-X2810 User Manual...
Page 19
Accounting Server: Enter the IP address of the accounting server. Accounting Port: Enter the accounting port. Accounting Secret: Enter the accounting secret. Save: Save the updated configuration. Click Configuration > Save and Activate to make changes permanent. D-Link DAP-X2810 User Manual...
Enter the subnet mask. All devices in the network must share the same subnet mask. Default Gateway: Enter the IP address of the gateway/router in your network. DNS: Enter a DNS server IP address. This is usually the local IP address of your gateway/router. D-Link DAP-X2810 User Manual...
When Auto is selected, the other fields here will be grayed out. IPv6 Address: Enter the LAN IPv6 address used here. Prefix: Enter the LAN subnet prefix length value used here. Default Gateway: Enter the LAN default gateway IPv6 address used here. D-Link DAP-X2810 User Manual...
In the Advanced Settings Section the user can configure advanced settings concerning Performance, Wireless Resource, Multi-SSID, VLAN, Intrusion, Schedule, Internal RADIUS Server, ARP Spoofing Prevention, Bandwidth Optimization, Captive Portal, DHCP Server, Filters and Traffic Control . The following pages will explain settings found in the Advanced Settings section in more detail. D-Link DAP-X2810 User Manual...
DTM Interval (1-15): Select a Delivery Traffic Indication Message setting between 1 and 15. 1 is the default setting. DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. D-Link DAP-X2810 User Manual...
Page 24
Access Point will automatically change to 20 MHz. Transfer DHCP Offer to Enable to transfer the DHCP Offer to Unicast from LAN to WLAN. It is suggested to enable this function if stations number is larger Unicast: than 30. D-Link DAP-X2810 User Manual...
User Limit (0 - 128): This function is only available when Connection Limit is enabled. Set the maximum amount of users that are allowed access (0 - 128 users) to the device using the specified wireless band. D-Link DAP-X2810 User Manual...
Page 26
RSSI lower than the specified threshold below. ACL RSSI Threshold: Click the drop-down menu to set the ACL RSSI Threshold. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
18. For a detailed description of the WPA-Enterprise parameters please go to page 19. Priority: Select the priority level of the SSID selected. WMM (Wi-Fi WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applications over a Wi-Fi Multimedia): network. D-Link DAP-X2810 User Manual...
Page 28
RADIUS Secret. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. Accounting Mode: Click the drop-down menu to enable or disable the accounting mode. Enter the IP address of the accounting server. Accounting Server: D-Link DAP-X2810 User Manual...
Displays the name of the VLAN. Untag VLAN Ports Displays the untagged ports. Tag VLAN Ports: Displays the tagged ports. Edit: Clink the icon to edit the current VLAN. Delete: Click the icon to delete the current VLAN. D-Link DAP-X2810 User Manual...
The name of the port is displayed in this column. Tag VID: The Tagged VID is displayed in this column. Untag VID: The Untagged VID is displayed in this column. PVID: The Port VLAN Identifier is displayed in this column. D-Link DAP-X2810 User Manual...
Provide a number between 1 and 4094 for the Internal VLAN. VLAN Name: Enter the VLAN to add or modify. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
Click the Save button to let your changes take effect. VLAN Status: Use the radio button to toggle between Enable and Disable. VLAN Mode: Displays the current VLAN mode. PVID Auto Assign Status: Use the radio button to toggle PVID auto assign status to Enable. D-Link DAP-X2810 User Manual...
AP. Alternatively, click the radio button to mark all new access points as valid or rogue. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
Check this box to have your settings apply 24 hours a day. Start Time: Enter the beginning hour and minute, using a 24-hour clock. End Time: Enter the ending hour and minute, using a 24-hour clock. D-Link DAP-X2810 User Manual...
Enter a password to authenticate user access to the internal RADIUS server. The length of your password should be 8~64. Status: Toggle the drop-down menu between Enable and Disable. RADIUS Account List: Displays the list of users. D-Link DAP-X2810 User Manual...
Click to delete all gateway entries. Edit: Click to edit the selected gateway entry. Delete: Click to delete the gateway entry. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
Use the drop-down menu to select the type that is applied to the rule. Available options are: Allocate average BW for each station, Allocate maximum BW for each station, Allocate different BW for 1a/b/g/n stations, and Allocte specific BW for SSID. D-Link DAP-X2810 User Manual...
Page 38
Click to remove the settings from the menu interface. Edit: Click to edit the selected gateway entry. Delete: Click to delete the gateway entry. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
URL of the website that will be used in the space provided. IPIF Status: Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group: Enter the VLAN Group ID here. Get IP From: D-Link DAP-X2810 User Manual...
Page 40
IP address of your gateway/router. Edit: Click to edit the selected entry. Delete: Click to delete the entry. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
URL of the website that will be used in the space provided. Select to Enable or Disable the Captive Portal IPIF Status: with its IP interface feature here. Enter the VLAN Group ID here. VLAN Group: D-Link DAP-X2810 User Manual...
Page 42
Click to remove the settings from the menu interface. Edit: Click to edit the selected gateway entry. Delete: Click to delete the gateway entry. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
URL of the website that will be used in the space provided. IPIF Status: Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group: Enter the VLAN Group ID here. D-Link DAP-X2810 User Manual...
Page 44
Last Active Day: Select the last active date for this passcode here. Year, Month and Day selections can be made. User Limit: Enter the maximum amount of users that can use this passcode at the same time D-Link DAP-X2810 User Manual...
Page 45
Click to delete all passcode setting entries Edit: Click to edit the selected entry. Delete: Click to delete the entry. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
URL of the website that will be used in the space provided. IPIF Status: Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group: Enter the VLAN Group ID here. D-Link DAP-X2810 User Manual...
Page 47
Select the remote RADIUS server type here. The default setting is SPAP. Edit: Click to edit the selected entry. Delete: Click to delete the entry. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
IP address to the DAP-X2810. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. D-Link DAP-X2810 User Manual...
Page 49
Edit: Click to edit the selected entry. Delete: Click to delete the entry. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
URL of the website that will be used in the space provided. IPIF Status: Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group: Enter the VLAN Group ID here. D-Link DAP-X2810 User Manual...
Page 51
None and SSL/TLS. Edit: Click to edit the selected entry. Delete: Click to delete the entry. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
Load MAC File to Local To download MAC bypass list file, click Download Hard Driver: and save the MAC bypass list. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
Lease Time: The lease time is the period of time before the DHCP server will assign new IP addresses. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
You can edit or delete the device in this list. Assigned MAC Address: Enter the MAC address of the device requesting association here. Subnet Mask: Define the subnet mask of the IP address specified in the “IP Assigned From” field. D-Link DAP-X2810 User Manual...
Page 56
Enter the DNS server address for your wireless network. Domain Name: Specify the domain name for the network. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
IP address from the DHCP dynamic pool. Assigned IP Address: The current corresponding DHCP-assigned static IP address of the device. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
Load MAC File to Local To download the ACL list, click Download and to save the ACL list. Hard Driver: Click to save the updated configuration. To make the updates Save: permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
Multi-SSID. In Guest mode, wireless stations cannot exchange data with any station on your network. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
Download IP Filter File: To download the IP Filter list file, click Download and to save the IP filter list. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
Downlink Bandwidth: The downlink bandwidth in Mbits per second. Uplink Bandwidth: The uplink bandwidth in Mbits per second. Click to save the updated configuration. Save: To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
Other Traffic Priority: Click the drop-down menu to select the level of priority for the selected rule. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
Enter the downlink speed in Mbits per second. Uplink Speed: Enter the uplink speed in Mbits per second. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
In the Status Section the user can monitor and view the configuration settings of the access point. Here the user can also view statistics about client information, WDS information and more. The following pages will explain settings found in the Status section in more detail. D-Link DAP-X2810 User Manual...
This page displays information like firmware version, Ethernet and wireless parameters, as well as the information regarding CPU and memory utilization. Device Information: This read-only window displays the configuration settings of the DAP-X2810, including the firmware version and the device’s MAC address. D-Link DAP-X2810 User Manual...
Authentication: Displays the type of authentication being used. RSSI: Displays the client’s signal strength. Power Saving Mode: Displays the status of the power-saving feature. System Info: Displays the associated clients’ OS information for the network. D-Link DAP-X2810 User Manual...
Displays the SSID of the client. MAC: Displays the MAC address of the client. Authentication: Displays the type of authentication being used. Signal: Displays the client’s signal strength. Status: Displays the status of the WDS link. D-Link DAP-X2810 User Manual...
Section 3 - Configuration Channel Analyze Wireless Band: Select either 2.4Ghz or 5GHz. Detect: Click the Detect button to scan. AP List: This will list the transmitting channels and quality. D-Link DAP-X2810 User Manual...
Section 3 - Configuration WLAN Traffic Statistics Displays throughput, transmitted frame, received frame, and error information for the AP network. WLAN Traffic Statistics: This page displays wireless network statistics for data throughput, transmitted and received frames, and frame errors. D-Link DAP-X2810 User Manual...
The log information includes but is not limited to the following items: cold start AP, upgrading firmware, client association with APs, and web login. The web page holds up to 500 logs. D-Link DAP-X2810 User Manual...
DAP-X2810 log to. E-mail Notification: Support Simple Mail Transfer Protocol for log schedule and periodical change key. It can not support Gmail SMTP port 465. Please set to Gmail SMTP port 25 or 587. D-Link DAP-X2810 User Manual...
Page 73
Retype the password entry to confirm the password. E-mail Log Schedule: Use the drop-down menu to set the email log schedule. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual...
In the Status Section the user can monitor and view configuration settings of the access point. Here the user can also view statistics about client information, WDS information and more. The following pages will explain settings found in the maintenance section in more detail. D-Link DAP-X2810 User Manual...
Limit Administrator IP: Check to enable the Limit Administrator IP address. IP Range: Enter the IP address range that the administrator will be allowed to log in from and then click the Add button. D-Link DAP-X2810 User Manual...
System Name: The name of the device. The default name is dapx2810. Location: The physical location of the device, e.g. 72nd Floor, D-Link HQ. MDNS Name : The MDNS name of the device. The default MDNS name is dapx2810. Login Settings Each of the eight main categories display various hidden administrator parameters and settings.
Each of the eight main categories display various hidden administrator parameters and settings. Status is enabled by default. Uncheck the box to disable DDP control. Country Setting Select a Country: Choose from drop down list country where device is located. D-Link DAP-X2810 User Manual...
Section 3 - Configuration Nuclias Connect Settings The Nuclias Connect section is used to create a set of APs on the Internet to be organized into a single group in order to increase ease of man- agement. Enable Nuclias Connect: Click the drop-down menu to enable or disable Nuclias Connect.
This page allows the user to perform a firmware upgrade. This upgrades the software running on the hardware used by the access point. This is a useful feature that prevents future bugs and allows for new features to be added to this product. Please go to your local D-Link website to see if there is a newer version firmware available.
Click “Download” to save the current Download Configuration configuration file to your local disk. File: Browse to the saved Nuclias Connect Upload Nuclias Connect Network file you have in your local drive Network File : and click “Open” and “Upload” to upload the Nuclias Connect Network file .
A user can either manually set the time Time Manually: for the AP here, or click the Copy Your Computer’s Time Settings button to copy the time from the computer in use (Make sure that the computer’s time is set correctly). D-Link DAP-X2810 User Manual...
Help allows the user to read more about the given options to configure without the need to consult the manual. The following pages will explain settings found in the configuration and system section in more detail. D-Link DAP-X2810 User Manual...
On this page the user can restart the unit, perform a factory reset of the access point or clear the added language pack. Restart the Device: Click Restart to restart the DAP-X2810. Restore to Factory Default Click Restore to restore the DAP-X2810 Settings: back to factory default settings. Clear Language Pack: Click to clear the current language pack. D-Link DAP-X2810 User Manual...
Help The help page is useful to view a brief description of a function available on the access point in case the manual is not present. Help: Scroll down the Help page for topics and explanations. D-Link DAP-X2810 User Manual...
Wireless Frequency Range • 2.4 to 2.4835 GHz and 5.15 to 5.85 GHz Operating Voltage • 12V/2.5A or 802.3at PoE Antenna Type • Two Dual Band Internal Antennas (2.4Ghz 3.2dBi & 5Ghz 4.3dBi) LEDs • Power/Status D-Link DAP-X2810 User Manual...
Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
Page 89
D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s...
Page 90
• USA residents send to 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.
Page 91
Appendix E - Warranty While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.
Page 92
Appendix E - Warranty derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.
Page 93
The firmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.
Page 94
The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. D-Link DAP-X2810 User Manual...
Power Usage This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. Network Standby: 4.838 watts D-Link DAP-X2810 User Manual...
Appendix G - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. D-Link DAP-X2810 User Manual...