Datamax ST-3210 Operator's Manual page 45

Parameter
Stock ID
Label (Ticket)
Width
Parser Mode
Print Speed*
Slew Speed*
Backup Speed*
Baud Rate
Word Length
Cutter Equip
Row Adjust**
Col Adjust**
Vert Adjust**
SOP Adjust
C/T Adjust
TOF Sense
Present DLY
No Reprint
*Rates given in Inches Per Second.
** Valid in the DTPL Parser Mode only.
S-Class
Operational Database: ST/SV-3210 Models
Description
Stock ID number
Width of the ticket stock used for
printing.
Sets the emulation of the printer
Speed during printing
Speed during feeding
Speed during backup
Serial communication speed
Communicated word length
Presence of the optional cutter will
be sensed automatically.
Horizontal adjustment of the point
where printing begins.
Vertical adjustment of the point
where printing begins.
Adjusts the number of formatted
dots in the vertical direction
Start of Print Position Adjustment
(see Section 4.2)
Cut/Tear Position Adjustment (see
Section 4.2)
Selects the method for sensing the
ticket Top Of Form
Delay - to stop the printer from
backing up the tickets when
printing multiple tickets.
When a fault condition is detected,
printing stops and the FAULT light
turns on. After the problem is
corrected, the FEED Key must be
pressed to clear the fault. The label
in process is not reprinted.
Settings
0-9 (see Section 4.1)
1.89 inches (48.0 mm)
2.04 inches (51.8 mm)
2.20 inches (55.9 mm)
2.36 inches (59.9 mm)
2.52 inches (64.0 mm)
2.67 inches (67.8 mm)
2.83 inches (71.9 mm)
2.99 inches (75.9 mm)
3.15 inches (80.0 mm)
Auto, DTPL, or DPL
4-10 IPS
4-10 IPS
3-5 IPS
600, 1200, 2400, 4800, 9600,
19.2K, 38.4K
7-bit word (even parity)
8-bit word (no parity)
Auto or No
-2.55 – 2.55 inches
(-64.8 mm – 64.8 mm)
-2.55 – 2.55 inches
(-64.8 mm – 64.8 mm)
0 – 20
Dots Per Inch
0 – 10.00 inches
(0 – 254 mm)
0 – 10.00 inches
(0 – 254 mm)
Reflective, Continuous
0 – 75 sec in 5sec increments
Delays the presentation of the last
ticket printed for the specified time
period.
Yes or No
37