Protection During Handling And Mounting; Battery Safety - Bosch Rexroth IndraControl VCP 35.2 Project Planning Manual

R911323106 / 02 | Rexroth IndraControl VCP 35.2
Safety Instructions for Electric Drives and Controls
3.10

Protection During Handling and Mounting

3.11

Battery Safety

Under certain conditions, incorrect handling and mounting of parts and
components may cause injuries.
CAUTION
Risk of injury by incorrect handling! Bodily harm caused by crush-
ing, shearing, cutting and mechanical shock!
• Observe general installation and safety instructions with regard to
handling and mounting.
• Use appropriate mounting and transport equipment.
• Take precautions to avoid pinching and crushing.
• Use only appropriate tools. If specified by the product documenta-
tion, special tools must be used.
• Use lifting devices and tools correctly and safely.
• For safe protection wear appropriate protective clothing, e.g. safety
glasses, safety shoes and safety gloves.
• Never stand under suspended loads.
• Clean up liquids from the floor immediately to prevent slipping.
Batteries contain reactive chemicals in a solid housing. Inappropriate
handling may result in injuries or material damage.
CAUTION
Risk of injury by incorrect handling!
• Do not attempt to reactivate discharged batteries by heating or other
methods (danger of explosion and cauterization).
• Never charge non-chargeable batteries (danger of leakage and ex-
plosion).
• Never throw batteries into a fire.
• Do not dismantle batteries.
• Do not damage electrical components installed in the equipment.
Be aware of environmental protection and disposal! The batteries con-
tained in the product should be considered as hazardous material for
land, air and sea transport in the sense of the legal requirements (dan-
ger of explosion). Dispose batteries separately from other waste. Ob-
serve the legal requirements in the country of installation.
Electric Drives and Controls | Bosch Rexroth AG 3-9