KTM 660 RALLY 2007 Supplement Manual page 35

MAINTENANCE WORK ON CHASSIS AND ENGINE
1
8
9
10
Assembling the carburetor (Keihin MX 41)
– Mount the idle-air jet [1] and the main air jet [2].
– Place the O-ring [3] in the groove and secure the intake trumpet to the
3
2
– Insert the fuel connection [4] into the carburetor and secure it with the
Note: In the mounted state, the connection piece must be easy to turn.
4
– Mount the choke slide [5] and actuate it several times, checking whether
5
– Thread the spring, the washer and the O-ring onto the mixture control screw
6
– Now, unscrew the mixture control screw the number of turns written down
Basic setting: See technical specification
– Mount idling jet [7], starting jet [8] and needle jet together with main
7
– Insert the needle jet [10] into bore and secure it by means of the
11
carburetor by means of the 2 screws.
clip.
it can be moved smoothly. In addition, check whether the choke locks
properly.
[6] and screw the mixture control screw in as far as it will go.
during disassembly.
jet [9].
screw [11].
»
35