Miele PG 8083 SCVi Operating Instructions Manual page 54

Problem solving guide
Problem
Interruption to the
power supply during
operation
The In-operation
indicator is flashing
quickly. The buzzer is
sounding. One of the
following messages
appears in the display:

Fault FXX

Waterproof
54
Possible cause and remedy
If a temporary interruption to the power supply
occurs during a programme sequence, no action is
required.
The programme will continue after the interruption.
If the temperature in the wash cabinet drops below
the minimum value required for the programme block
during the interruption to the power supply, the
programme block will be repeated.
In the case of an interruption to the power supply of
≥ 20 hours, the entire programme will be repeated.
Before rectifying the problem, you must:
 Switch the dishwasher off with the  button.
There may be a technical fault.
After a few seconds:
 Switch the dishwasher back on.
 Select the required programme.
 Close the door.
If the fault message appears again, there is a
technical fault.
 Call the Miele Professional Service Department.
The Waterproof system has reacted.
 Turn off the tap.
 Call the Miele Professional Service Department.