3D Cutlery Tray - Miele PG 8083 SCVi Operating Instructions Manual

3D cutlery tray

 Arrange the cutlery in the tray as
shown.
To make unloading easier, cutlery
should be grouped in zones, one for
knives, one for forks, one for spoons
etc.
Spoon heads should be placed in
contact with at least one of the serrated
retainers on the base of the cutlery tray
to ensure that water runs off them
freely.
The upper spray arm must not be
blocked by items which are too tall
(e.g. cake servers).
The side sections of the tray can be
moved into the middle to accommodate
tall items of crockery in the upper
basket.
Loading the dishwasher
If spoon handles do not fit between the
holders, then lay them the other way
round.
You can use the yellow slide to adjust
the height of the middle section of the
cutlery tray to make more room for large
items of cutlery, such as serving
spoons and ladles.
35