Standard Settings - Miele PG 8083 SCVi Operating Instructions Manual

Commissioning

Standard settings

 Switch the dishwasher on with the
 button.
If the dishwasher is being switched on
for the first time, the welcome screen
will appear.
Language
The display will change automatically to
the screen for setting the language.
See "Display" for more information
about the display and functions.
 Select the language you want and
press the middle button to confirm.
A tick  will appear next to the
language that has been set.
Water hardness
The display will change to the screen
for setting the water hardness.
– The dishwasher must be
programmed to the correct water
hardness in your area.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– Where the water hardness fluctuates
e.g. between 3.1 and 4.5 mmol/l (17 -
25 °d - German scale), always
programme the dishwasher to the
higher value (4.5 mmol/l or 25 °d in
this example).
20
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Enter the water hardness below:
____________mmol/l
The dishwasher is programmed at the
factory for a water hardness level of 2.7
mmol/l (15 °d - German scale).
 Select the water hardness level for
your water supply and confirm with
the middle button.
See "Settings menu - Water hardness"
for more information.
The following two messages 
and 
rinse aid Add salt
in the display.
Press any button to confirm these
messages. The display will change to
show the main menu.
Add
may then appear