Registering Your Diverse Deskphone With A Base Station - BT 2010 User Manual

Registering your
Diverse Deskphone with
a base station
Registering with Diverse
1010,1015, 2010 and
2015 base stations
If your Diverse Deskphone has not been
registered previously to other base
stations, the display will show: REGISTER?
If REGISTER? is not displayed, firstly
select the REGISTER option from the
SETTINGS menu, then select the base
station number you wish to register it
with, then follow the instructions below:
At the Deskphone
Press keypad buttons in order shown
Press .
OK
OK
Enter the base station code
CODE
(default 0000).
At the base station
Press the green or grey
button on the base station (for
about 10 seconds) until you hear
a beep. You now have up to
1 minute to register your
Deskphone.
At the Deskphone
OK
KEYPAD
PAGER
Press . After a short while all
OK
available telephone extension
numbers will be displayed.
Enter one of the extension
numbers using the keypad.
The telephone is now registered
as the extension number you
have chosen. The Deskphone
will beep once and briefly flash
INT plus its extension number on
the display. To confirm successful
registration, check that the base
number, eg. Base 1, has stopped
flashing.
If you experience any problems
registering your new phone,
please call the Diverse Helpline
on .
0845 798070