The Base Station - BT 2011 User Manual

Registering a
Diverse 2011
handset with a
base station
To register your handset with
more than one base station or to
re-register your handset
You can also follow these steps if you
want to register a handset to only
one base station but do not want it to
appear on the display as BASE 1.
...either at a Diverse 1010, 1015,
2010, 2011, 2015, 2020 Pocket or 2016
base station. Press and hold down the
button at the base station
PAGING
until you hear the beeps (after about
10 seconds)
...or at a Diverse 2-line or Diverse
ISDN base station
Press the green LED button. The
LED flashes during the registration
process.
...then, at the handset
OK
RED
• Press the
MENU
• Press the
DOWN
SETTINGS.
• Press the button.
OK
• Press the
DOWN
REGISTER.
• Press the button.
OK
• Press the
DOWN
the base station you want to
register with (BASE1 to BASE 6).
• Press the button.
OK
button.
button to highlight
button to highlight
button to select
• Enter the base station code
(default = 0000).
• Press the button. There is a
OK
short wait until the available base
station numbers are displayed.
• Enter one of the free internal
extension numbers displayed on
your screen.
• Press the button to confirm.
OK
To set the Diverse 2011 to select
the strongest base station signal
Once you have registered your
Diverse 2011 to additional base
stations, you can also set it to log on
to the strongest base station signal
automatically.
OK
RED
• Press the
MENU
• Press the
DOWN
SELECT BASE.
• Press the button.
OK
• Press the
DOWN
BEST BASE.
• Press the button.
OK
button.
button to highlight
button to highlight
31