Using The Diverse Deskphone - BT 2010 User Manual

Using the
Diverse Deskphone
Making and receiving
external calls
To make an external call
Press keypad buttons in order shown
Lift the handset and dial the
number.
Or,
Enter the number on the keypad,
KEYPAD
check that it is correct and
then lift the handset to dial.
If you make a mistake entering
numbers, use
them.
Please note
If another handset or Deskphone is
already in use and all available lines are
in use, you will hear an engaged tone
when attempting to dial out.
To end a call
Replace the handset on the cradle.
to delete
DELETE
To use the loudspeaker
This allows you to talk without
holding the handset.
Press
LOUDSPEAKER
after dialling the number.
Or during a call
Press and hold the
LOUDSPEAKER
replacing the handset on the base,
then release the loudspeaker
button.
+
You can adjust the loudspeaker/
handset volume during a call with
–
+ –
/ buttons on the Deskphone.
Please note
If you wish to switch to loudspeaker
during a call, press and hold down the
button and do not
LOUDSPEAKER
release it until you have placed the
handset in the cradle.
If you fail to hold down the
button, the call will
LOUDSPEAKER
be disconnected.
before or
button whilst
13