Register Handset With An Additional Base - BT EQUINOX 1200 User Manual

6215 Equinox 1200 UG
66 Additional handsets and bases
To register a GAP compatible
handset to your BT Equinox base,
please refer to the instructions
supplied with the handset you are
trying to register.
All the bases that a handset can be
linked to are indicated by an .
9/6/04 11:27 am Page 66
BT Equinox 1200 – Edition 6 – 28.05.04 – 5757
5. At the base: press and hold
beep. The handset screen will show the base ID number.
Press
Handset Registered
and is given the first available handset number. You can
now use the handset.

Register handset with an additional base

A handset registered with one base can then be registered
with up to three more bases, e.g. at work, at home, at a
relative's home.
1. Press MENU
Register Handset
2.
3. Scroll
4. Enter the selected base's SYSTEM PIN (original setting
0000). Press OK.
5. At the base: press and hold
beep. The handset screen shows the base ID number,
press OK. The handset reverts to standby and
is given the first available handset number. It is now
registered to the new base and ready for use.
Page
OK to confirm. The handset screen then shows
. The handset reverts to standby
then scroll to Registration
is highlighted. Press OK.
or to select the base. Press OK.
Page
until you hear the base
and press OK.
until you hear the base