Changing Paper Thickness Settings - Ricoh C230 Operating Instructions Manual

Changing Paper Thickness Settings

Select [Plain Paper 1] or [Plain Paper 2] depending on the type of plain paper.
If in System Settings, [Tray Paper Settings], you set "Paper Thickness" to [Plain Paper] for each tray's [Paper
Type], you must then select [Maintenance], [Plain Paper Setting] and specify either [Plain Paper 1] or [Plain
Paper 2], depending on the thickness of the loaded paper.
The default setting is Plain Paper 2.
• Select [Plain Paper 1] when paper weight is between 61 80 g/m
• Select [Plain Paper 2] when paper weight is between 81 90 g/m
1. Press the [User Tools/Counter] key.
2. Press [Maintenance].
CCS062
Changing Paper Thickness Settings
2
(16 20 lb. Bond).
2
(20 24 lb. Bond).
3
87