Cleaning The Power Cord Plug - Ricoh C230 Operating Instructions Manual

7. Remarks
1
. Turn off the main
power switch, and
then unplug the
power plug.
. Open the front cover.
. Raise the two grips
on the front of the
waste toner bottle,
and then pull it out
slowly.
4
. Return the cleaning
7
brush to its original
position.

Cleaning the Power Cord Plug

This section describes precautions for cleaning the power cord plug.
• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the
prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
124
2
. Release the catch of . Insert the cleaning brush into a
the cleaning brush
(1), hold the catch to
prevent it re-
. Slide the cleaning brush slowly
engaging, and then
raise the cleaning
brush grip (2).
5
. Insert the waste toner . Return the two grips
bottle carefully.
. Close the front cover.
. Make sure the power
3
hole so that its arrow mark is
pointing up.
into and out of all four holes
four or five times to clean the
dustproof glass.
6
to its original position.
cord is firmly plugged
into the wall outlet.
CCS049