Using Additional Handsets - BT Quartet 1500 User Manual

Using Quartet 1000
Additional handsets
You can buy and use up to 3 Quartet
1000 additional handsets with your
Quartet 1500 to extend your phone
system, without needing to install
extension sockets for each new phone.
Each additional handset is supplied
with its own charger and user
instructions, but the following
information will tell you how to
register and use an additional handset
with your Quartet 1500.
You must charge your additional
handset for 24 hours before
registering it.
Your Quartet 1000 additional
handset does not allow access to
answering machine functions
35
You must register your Quartet
additional handset before it can be
used with your Quartet base unit.
Make sure that each additional
handset is registered with a different
number (2, 3 or 4) so it can be
identified from other additional
handsets, see page 36. This is
necessary for transferring calls.
Place the handset you wish
to register on the base unit
and then remove it.
Press and hold the base unit
hear a beep and the IN USE
light on the base unit and
the IN USE/BATTERY LOW
light on the handset begin
to flash.
Release the base unit
press the
the new additional handset.
button until you
button and
button on