Help And Advice - BT Quartet 1500 User Manual

Help and advice

Telephone problems
41
Possible cause
Telephone not connected to
telephone line.
Mains disconnected.
Power cut.
Handset battery pack is discharged.
Handset not registered.
You may be trying to use tone
dialling on a pulse dialling
exchange.
You are connected to a PBX and
are not dialling the access code.
Handset battery pack is
discharged.
Solution
Plug the telephone into the
telephone line.
Ensure the power supply is
correctly fitted and switched on.
Wait until the power is restored.
Replace handset on base unit for
10 seconds and try again. If this
does not work, disconnect the
handset battery from the handset
for 10 minutes. Also disconnect
the mains power.
Then reconnect the base unit to
the mains and then replace the
handset on the base unit for 10
seconds and try again.
Place the handset on the base
unit and recharge it for 24 hours
ensuring the CHARGING light
is on.
Register the handset, see page 35.
See page 39 to change to pulse
dialling.
Use the PBX access code.
See page 39 for more information
on switchboard use.
Place the handset on the base
unit and recharge it for 24 hours.