BT Quartet 1500 User Manual page 26

Your Quartet 1500 will automatically
record an incoming message when it
is connected to your phone socket
and is set to 'Answer on', using
outgoing Message 1 or 2. Message 3
is an advisory announcement only
and cannot record your caller's
message.
While a message is being recorded,
the display on the base unit flashes r.
It will stop recording if the caller stops
speaking for longer than 4 seconds.
The maximum incoming message
length is 3 minutes. If this is reached,
or the memory becomes full, the
caller will hear, "Thank you for calling"
and your Quartet 1500 will hang up.
When the recording memory is full,
the display will alternate between the
number of messages and F.
If the answering machine is switched
on, and the memory is full, incoming
callers will hear the default message
"Hello, your call cannot be taken at
the moment and you cannot leave a
message so please call later".
If a call comes in while you are
playing back a message or memo,
the playback stops and the machine
is ready to take the call.
23
Play
Press the
Pause
The prompt will announce,
"You have (n) messages".
Your messages will be
played back, starting with
the first message received.
At the start of each
message, the number of the
message is announced. The
number will also be shown
on the display.
Press the button at any time
during playback to stop messages
playing.
button.