Baofeng UV-5RV2+ Operating Manual page 62

Menu Item Shortcut
AL-MOD 32
Availability: Global
Settings/Notes
SITE [0] | TONE [1] | CODE [2]
SITE: Sounds alarm through the radio speaker only
TONE: Transmits a cycling tone over-the-air
CODE: Transmits '119' (911 in reverse?) followed by the ANI code over-the-air
Note: Recommended setting is SITE
Menu Item Shortcut
BAND 33
Availability: MR/Channel Mode (Read Only), VFO/Frequency Mode, Separate VFO A & B Settings, Stored in Channel
Settings/Notes
VHF [0] | UHF [1] Default: VHF
Note: When transitioning from VHF to UHF or from UHF to VHF, the selected band's low frequency limit becomes the displayed
frequency (the original 'scratch' frequency is lost)
http://www.baofengradio.us
Description
ALarm – MODe
Default: TONE
Description
BAND Selection: In VFO/Frequency mode, sets [A] or [B] to the VHF or UHF band.
http://baofengradio.us
62