Baofeng UV-5RV2+ Operating Manual page 21

For the following example, assume a 12.6 kHz frequency step.
Entering the frequency 145.6875 MHz on Display A
1. Use the [VFO/MR] button to switch to Frequency (VFO) mode.
2. Press [A/B] button until the black arrow appears next to the upper display (Display A).
3. Enter [1] [4] [5] on the numeric keypad, it should look something like this:
4. When entering the final four digits, note that only three decimals can be entered on the keypad. If
5. By rounding 145.6875 up to 145.6880, the frequency can now be entered.
6. Enter [6] [8] [7] on the numeric keypad, it should look something like this:
Note: Just because programming is enabled in a channel does not mean authorization is granted for use of that
frequency.
Transmitting on frequencies without authorization is illegal, and in most jurisdictions is a serious offence. If caught transmitting
without a license, fines can be levied, and in some cases jailtime.
However, in most jurisdictions it is legal to listen. Contact your local regulatory entity for further information on what laws, rules
and regulations apply in your area.
http://www.baofengradio.us
6875 is typed, it won't work as the last digit is omitted.
http://baofengradio.us
21