Baofeng UV-5RV2+ Operating Manual page 43

15 ANI (Automatic Number Identification) Can only be configured by PC
software.
16 DTMFST (The DTMF tone of transmitting code.)
17 S-CODE (Signal Code) Can only be configured by PC software.
18 SC-REV (Scan Resume Method)
19 PTT-ID (press or release the PTT button to transmit the signal code)
20 PTT-LT (delay the signal code sending)
21 MDF-A (In channel mode, display channel A) Note: channel display
name can only be configured by PC software.
22 MDF-B (In channel mode, display channel A) Note: channel display
name can only be configured by PC software.
23 BCL (Busy Channel Lockout)
24 AUTOLK (Keypad Locked Automatically)
25 SFT-D (Direction of Frequency Shift)
26 OFFSET (Frequency Shift)
27 MEMCH (Stored in Memory Channels)
28 DELCH (Delete a Memory Channel)
29 WT-LED (display illumination color during standby)
http://www.baofengradio.us
http://baofengradio.us
OFF/DT-ST/ANI-ST/DT+ANI
1,...,15 groups
TO/CO/SE
OFF/BOT/EOT/BOTH
0,...,30ms
FREQ/CH/NAME
FREQ/CH/NAME
OFF/ON
OFF/ON
OFF/+/-
00.000...69.990
000,...127
000,...127
OFF/BLUE/ORANGE/PURPLE
43