System Pin; Default Base Settings - BT EQUINOX 1350 User Manual

System PIN

The System PIN is used for registering and deregistering
handsets and some other optional settings. The default
System PIN is 0000.
1. Press MENU then scroll
OK. Press to highlight
2. Enter the current PIN (Original setting 0000) and press OK.
3. Enter the new PIN, press
OK
4. Press to confirm.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Equinox 1350 – Edition 4.1 – 27.09.05 – 6576
to Base Settings and press
System PIN then press OK.
OK and enter it again.
Base settings
Protecting your settings
When entering a PIN the digits are
shown as asterisks.
Keep track of your PIN
If you change the System PIN,
keep a record of the new number
by writing in the space provided on
page 101. You need your System
PIN for registering handsets and
for some other optional settings.
If you enter the PIN incorrectly the
screen shows Incorrect Pin.

Default base settings

Base ringtone Standardmelody 4
Base ringer
volume 5 (max)
Recall mode Timed Break
Dial mode Tone
System PIN 0000
Handset
priority All handsets
Access code Off
81