Getting Started; Location; Setting Up - BT EQUINOX 1350 User Manual

Getting started

8
WARNING
Do not place your BT Equinox
1350 in the bathroom or other
humid areas.
Handset range
The BT Equinox 1350 has a range
of 300 metres outdoors when there
is a clear line of sight between the
base and handset. When there is
no clear line of sight between the
base and handset, e.g. base
indoors and handset either indoors
or outdoors, the range could be
reduced to 50 metres. Thick stone
walls severely affect the range.
Signal strength
The symbol on your handset
screen indicates when you are in
range. When you are out of range,
it flashes.
IMPORTANT
Do not connect the telephone line
until at least one of the handsets is
fully charged.
The base must be plugged into the
mains power at all times.
Which socket?
Power socket
Telephone line socket
If you experience any problems, please call the Helpline on 0870 605 8047
BT Equinox 1350 – Edition 4.1 – 27.09.05 – 6576

Location

You need to place your BT Equinox 1350 close enough
to a mains power and telephone socket so that the cables
will reach.
Make sure it is at least 1 metre away from other electrical
appliances to avoid interference.
Your BT Equinox 1350 works by sending radio signals
between the handset and base. The strength of the
signal depends on where you site the base. Putting it as
high as possible ensures the best signal.

Setting up

1. Plug the mains power cable into the base and plug the
other end into the wall socket.