Table of Contents
Advertisement
Settings menu
Showroom prog.
This setting is intended for dealers
only.
The dishwasher is fitted with
demonstration programmes for
showroom use.
Demo with sound
–
The pumps are activated to
demonstrate the sound of the
dishwasher.
Demo AutoOpen:
–
The door will open automatically.
To switch Demo mode on
^ Select the option you want.
^ Select
On
and confirm with the
middle button.
^ Close the Settings menu
^ Press the Start/Stop button.
Demo mode will begin.
To switch Demo mode off
Demo mode will switch off automatically
when it reaches the end of the cycle.
76
:
:
Factory settings
If you have altered any settings from
the factory default, you can reset them
back to the factory default settings. You
cannot use this function to reset either
the External dispensing option if this
has been activated or the detergent
amount or dosage concentration set for
external dispensing.
^ Select
Reset to default
your selection with the middle button.
To close the Settings menu
Close
Use
to come out of the Settings
menu.
^ Select
Close
and confirm your
selection with the middle button.
The last programme selected will
appear in the display briefly and the
appropriate indicator light will come on.
After a short while, the estimated
programme duration will appear in the
display.
and confirm
Advertisement
Table of Contents
