Table of Contents
Advertisement
Operation
Switching on
^ Open the stopcock, if it is closed.
^ Make sure the spray arms are not
obstructed.
^ Close the door.
^ Switch the machine on with the -
button.
The ECO programme (which is the
factory default programme) will appear
in the display for a short time and the
appropriate indicator light will come on.
After a short while, the estimated
duration for the programme will appear
in the display.
You can alter the setting of the
dishwasher so that the last programme
used will appear in the display when
the machine is switched on (see
"Settings menu, Pre-select prog.").
Selecting a programme
Choose your programme according to
the type of load and the degree of
soiling.
The different programmes and their
uses are described in the Programme
chart later on in this booklet.
^ Select the programme required with
the X button.
The indicator light for the programme
selected will light up and the indicator
light for the Start/Stop button will flash.
34
When the indicator light for the 4
symbol lights up you can use the 4 >
button to select one of the further
programmes.
The further programmes will appear in
the display which will alternate between
showing the programme name and the
duration.
You can now select additional
functions (see "Additional functions").
Starting the programme
^ Press the Start/Stop button.
The programme will begin.
If any additional functions are selected,
the appropriate indicator lights will also
light up.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Advertisement
Table of Contents
